| Invert piston and fill piston and piston rod with oil. Attach the special tool on pistion pam attach air nipple and pressure test to required pressure.Check for sealing ring tightness and crack in the crown |
Since very small needle lift is obtained in the test equipment result in an unequal pressure distribution in the cut off shaft resulting in a hard contact in a small area along with high frequency oscillations, low lubricity of test oil will increase the chance of seizure. Full lift and high lubricity of heavy oil eliminates this risk of seizure during normal operation.( Always open and clean slide type valves before testing as cold sticky heavy oil along with small clearances can cause restriction in the movement of the spindle).
Comments