Skip to main content

Short cycling in refrigeration compressor

Regular stopping and starting of compressor by the action of low pressure controller

causes:
  • under charge
  • frosting or clogging of evaporator
  • dirty suction strainer
  • low pressure controller differential too high.
  • Wrong capacity control setting.

Comments

Popular posts from this blog

Why atomisation test should not be done in slide type fuel valves

Since very small needle lift is obtained in the test equipment result in an unequal pressure distribution in the cut off shaft resulting in a hard contact in a small area along with high frequency oscillations, low lubricity of test oil will increase the chance of seizure. Full lift and high lubricity of heavy oil eliminates this risk  of seizure during normal operation.( Always open and clean slide type valves before testing as cold sticky heavy oil along with small clearances can cause restriction in the movement of the spindle).