Skip to main content

SOLAS & MARPOL LATEST AMMENDMENTS


Dated January 1st 2014

MARPOL Ammendments

1.MARPOL - Regulations for the prevention of pollution by harmful substances carried by sea in packaged form (Annex III), to include changes to the Annex to coincide with the next update of the mandatory IMDG Code

2.The United States Caribbean Sea ECA (Sulphur oxide, Nitrogen oxide and Particulate matter) came into effect, under MARPOL Annex VI, on 1 January 2014, bringing in stricter controls on emissions of (SOx),  (NOx) and particulate matter for ships trading in certain coastal areas near Puerto Rico and the United States Virgin Islands.


SOLAS Ammendments

3.Passenger ship safety (in relation to safe return to port after a flooding casualty); to introduce a mandatory requirement for new passenger ships for either on-board stability computers or shore-based support, for the purpose of providing operational information to the Master for safe return to port after a flooding casualty.

4.The testing of free-fall lifeboats-to require that the operational testing of free-fall lifeboat release systems shall be performed either by free-fall launch with only the operating crew on board or by a simulated launching.

5.Amendments in Minimum safe manning levels

6.Amendments for the Prohibition of blending on-board-bulk liquid cargoes during the sea voyage and to prohibit production processes on board ships.

Comments

Popular posts from this blog

Why atomisation test should not be done in slide type fuel valves

Since very small needle lift is obtained in the test equipment result in an unequal pressure distribution in the cut off shaft resulting in a hard contact in a small area along with high frequency oscillations, low lubricity of test oil will increase the chance of seizure. Full lift and high lubricity of heavy oil eliminates this risk  of seizure during normal operation.( Always open and clean slide type valves before testing as cold sticky heavy oil along with small clearances can cause restriction in the movement of the spindle).